Tenda I6

The Tenda i6 is a Wireless Access Point / WDS Repeater / Client + AP that supports the 802.11b / g / n standard in the 2.4 GHz band at speeds up to 300 Mbps with MIMO 2x2 technology. Supports 4x SSID, VLAN, active PoE power, SMTP and other technologies.

The Tenda i6 provides three working modes

Access Point - In this mode, the i6 is connected to the network via an Ethernet cable and transmits your wireless network.
Extend WiFi signal - WDS Repeater - in this mode you select which WiFi network to connect i6 to extend the signal where it is already weak or fluctuating. The primary device must support WDS. The name of WiFi remains the same, security and password also, the range is dramatically increased. This allows you to connect two or more i6s to extend the range of your wireless network to more distant locations.
Extending WiFi signal - Client + AP - this mode is very similar to Universal Repeater mode, in this mode you select which WiFi network to connect i6 and extend the signal where it is already weak or fluctuating. But in this mode it is also possible to set up your own WiFi network, security, password, etc. Tenda i6 connects to the first WiFi network, and creates a second WiFi network, both networks and devices communicate with each other directly in one LAN network.                                                                               
Tenda i6 is suitable for small and medium businesses as well as households.                                                                                    

The Tenda i6 includes "Quick Setup" for quick and easy setup in just a few steps. With a guide in Czech, Slovak and Polish, it takes only a few minutes to install and configure your new Wi-Fi device. MIMO 2x2 technology guarantees excellent coverage and high-speed WiFi.                                                                                                                                                                                            

Tenda i6 supports many types of 64/128/152-bit WEP security, WPA / WPA2-Enterprise, WPA-PSK, WPA2-PSK, the ability to disable your wireless network name (SSID), MAC address filtering, VLAN for each SSID, 4x different SSIDs with different security, SMTP v1 and v2c, output power settings, and other extra network features. The device is equipped with two integrated antennas, each with a gain of 3 dBi.

Brand - Tenda, Model - Tenda I6, Network Standards - IEEE 802.11b, g, n, Data Transfer Rates (Mbps) - 300Mbps, Security Protocols - 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2, Frequency - 2.4GHz, Interface - 1 x FE port, Antenna Type & Qty - 2 x 2dBi Internal Omni, Processor - 300MHz, LED Indicators - SYS, Power Method - DC 9V=0.6A,, Max. Power Consumption - 6W, Passive PoE Power Supply - 802.3af PoE, Transmission Power - Adjustable power by 1dBm, Operating Mode - AP/Client+AP/Repeater, Dimension - 144.2 x 144.2 x 40.12mm, Others - Maximum Concurrent Clients: 20, Specialty - Wireless N300 Access Point, Enable/Disable Wireless Radio, SSID Hidden, Wireless Client isolation, Sensitivity Threshold, WMM Capable, Wireless Multicast Forwarding, APSD Capable, Wireless Access Control, SSID-To-VLAN tagging, Ceiling Design, High Power Design, Power over Ethernet(802.3af), Quality of Service (QoS), Industrial Wireless Security, Centralized Managed by AP Controller, Warranty - 1 Year